01 / Steam
Ice Dam Steaming
Low-pressure steam cuts channels through the dam so meltwater drains instead of backing under shingles.
- Method Low-pressure steam
- Tools we skip No picks, no salt
- Timing Often same day
Twin Cities Ice Dam & Roof Snow Removal
Ice Dam Removal & Roof Snow Clearing in the Twin Cities
EAVEX removes ice dams with low-pressure steam and clears roof-edge snow across Minneapolis and the Twin Cities — never picks, hatchets or rock salt that shred shingles. 1200+ projects, 5.0 rating, license BC808261. Call (763) 313-8516 for same-day triage when slots allow.
Typical Twin Cities range (2026)$350–$1,200+ typical visitTypical Twin Cities range (2026) for residential steam ice-dam work. Final quote after we see linear feet of ice, stories and access. Emergency same-day slots when available.
Typical timelineSame-day when slots allow · steam on arrival
Financing availableFrom 0.00%–9.99% APR · plan 6124
Licensed BC808261 & insured
Low-pressure steam — no picks, no salt
Same-day emergency slots when available
Financing from 0% APR (0.00–9.99%) with GreenSky
Investment
How much does ice dam removal cost in Minnesota?
02 / Rake
Roof-Edge Snow Clearing
Pull snow back from the eave to cut the fuel supply before a new dam forms after the next warm day.
- Method Roof rake from grade / safe edge
- Goal Reduce load at the eave
- Timing Often with steam visit
03 / Prevent
After-Action Check
Gutters, guards and ice & water shield notes so the next cold snap is less likely to repeat the emergency.
- Scope Written findings
- Optional Gutter / roof quote
- Timing Same visit or spring
01 / Steam
Low-Pressure Steam
Steam melts a path through the dam without the impact that cracks shingles and bends flashing. Water leaves the roof the way it was designed to.
02 / No damage tools
No Picks, No Salt
Roofing picks and rock salt shred granules, corrode metal and open leak paths you will find in April. We will not use them on your roof.
03 / Eave focus
Gutters and Fascia
Ice at the eave crushes gutters and soaks fascia. We clear the trough line and flag wood that already failed so spring repairs are planned, not guessed.
04 / Response
Same-Day When We Can
Minnesota cold snaps fill the calendar fast. When a steam slot is open, we take it. When it is not, you get a clear next window — not radio silence.
Scope of work
Included in steam ice dam removal
Steam and rake work to stop active water intrusion — not a roof rebuild.
Included
- Low-pressure steam melting of ice dams at the eave and into the gutter line
- Roof-edge snow raking to reduce load before new dams form
- Clearing ice plugs at downspout outlets when reachable
- Protection of landscaping and walkways under the work zone where practical
- Visual check of gutters, fascia and obvious interior drip points after melt
- Honest note if shingles, flashing or fascia already failed and need a separate repair
Not included
- Full roof replacement, ice & water shield retrofit, or attic insulation upgrades
- Interior drywall, paint or contents restoration
- Using picks, hatchets, chisels or rock salt on the roof (we will not)
- Driveway / sidewalk snow plowing
- Work in unsafe wind, lightning or extreme ice conditions that put the crew at risk
- Guaranteeing no future ice dams without addressing heat loss and ventilation
01 / Method
Why use steam for ice dam removal?
An ice dam is a ridge of ice at the eave that traps meltwater upslope. That water has nowhere to go but under shingles and into the attic. Low-pressure steam opens drainage channels through the ridge without beating the roof. Picks and hatchets puncture shingles and flashings. Rock salt and calcium chloride leave corrosive brine that eats metal gutters and stains siding.
- Steam softens ice at the contact line so water can drain to the gutter and downspout
- No impact tools on asphalt, metal or cedar — the roofing system stays intact
- No chemical melt that corrodes aluminum gutters and leaves white staining
- Crew controls wand heat and pressure at the eave where dams actually form
02 / Risk
How bad ice-dam removal can damage a roof
Homeowners who chip ice with roofing hatchets often trade a wet ceiling today for a leaking roof in spring. Broken seal strips on asphalt shingles let wind-driven rain in. Bent drip edge and crushed gutters stop draining even after the ice is gone. EAVEX would rather leave carefully than “win” a faster job with permanent damage.
- Punctured shingles and torn underlayment become chronic leak points
- Hammered ice transmits shock into older sheathing and brittle flashings
- Salt brine accelerates corrosion on aluminum gutters and galvanized steel
- Incomplete chip jobs leave dams that refreeze overnight and push water farther indoors
03 / Eave work
Ice dams on gutters and fascia
Many Twin Cities calls start as “gutters full of ice.” That ice is often the lower face of a dam sitting on the drip edge. We steam the trough carefully so outlets open without ripping hangers out of soft fascia. If boards are already rotten, you get a written note for spring — not a silent failure next season.
- Clear ice plugs at outlets so meltwater can leave the eave
- Protect hangers and seams while the trough thaws
- Flag fascia and soffit staining that means water already reached the wood
- Optional follow-up: seamless gutters, guards, or fascia wrap when weather allows
04 / Timing
How fast can ice dam removal start?
During a polar-vortex week, every steam crew in the metro is booked. EAVEX takes same-day emergency slots when equipment and safe travel allow — often within hours for active interior leaks. Overnight lows that glaze roads push work to the next daylight window. We tell you which one you are getting before we roll.
- Active interior drip: highest priority for open steam slots
- Prevention raking after a heavy snow: bookable before the next thaw
- Multi-story or steep roofs: longer on-site time, scheduled with enough daylight
- After removal: optional spring roof and gutter inspection so the pattern does not repeat
05 / Prevention
Preventing ice dams after steam removal
Ice dams form when heat escapes into the attic, melts snow mid-roof, and refreezes at the cold eave. Steaming stops the emergency. Lasting relief is air sealing, insulation, balanced soffit-to-ridge ventilation, and ice & water shield at the eave on the next reroof. We will say that plainly even though it is not always our sale.
- Roof raking after storms reduces fuel at the eave between thaws
- Clear gutters and guards in fall so meltwater has an exit
- Ice & water shield at eaves on reroofs — Minnesota code territory for a reason
- Ask about a spring roofing or gutter quote if this winter exposed weak spots
Ice dam prevention in Minnesota — ventilation, ice & water, gutters
06 / Why EAVEX
Local ice dam removal crew in Minnesota
EAVEX (DBA of Dimov LLC) works Twin Cities eaves year-round: gutters, guards, fascia, roofing. Ice season is not a side hustle — it is the same license BC808261, insurance and 5.0 Google rating homeowners already use for exterior work. 1,200+ projects, 13+ years. Financing from 0% APR (0.00–9.99%) with GreenSky plan 6124 when you qualify for larger follow-up repairs.
- Steam and rake methods that protect the roofing system
- Same company can repair gutters and fascia after thaw
- Albertville base — Minneapolis through Wright and Sherburne suburbs
- Straight talk on what steam can and cannot permanently fix
Service area
Where we remove ice dams in the Twin Cities
Based in Albertville. We serve the Twin Cities metro and nearby suburbs.
Explore all EAVEX exterior services or read our guide to ice dam prevention in Minnesota.
Work stages
Four steps. Zero surprises.
01
Call · Triage
Same-day when slots allow
Tell us the address, stories and whether water is already inside. We confirm a steam slot or the next safe window and give a ballpark from photos when you can send them.
02
Arrive · Scope on site
15–30 min walkthrough
We measure linear feet of ice, check access and confirm the written price before the steamer starts. No surprise invoices mid-job.
03
Steam & rake · Clear the eave
Most homes: 2–6 hrs
Low-pressure steam opens channels through the dam; roof rakes pull snow back from the edge. Gutters and outlets cleared when ice allows. Thick multi-story dams take longer.
04
Check · Next steps
Same visit notes
We walk the eave with you, note fascia or shingle damage, and recommend follow-up (gutters, guards, ice & water shield) only if you want a lasting fix — not a hard sell in a crisis.
Free on-site inspection
Ice backing up at the eave?
Call now. If a same-day steam slot is open, we will tell you on the phone. If not, we book the next safe window and help you protect the interior in the meantime.
Our projects
Real homes. Real results. Drag to compare.
Reviews
What homeowners say Straight from Google.
Google rating
1200+
Completed projects & happy clients
13+
Years serving Minnesota
Questions & answers
Common questions
How much does ice dam removal cost in the Twin Cities?
Typical Twin Cities range (2026) for a residential steam visit is about $350–$1,200+, depending on linear feet of ice, stories and access. Thick multi-story or complex roofs run higher. That is a market range, not an EAVEX price list — we confirm scope on site before work starts. Financing available from 0% APR (0.00–9.99%) with GreenSky, plan 6124, when you qualify for larger follow-up repairs.
How fast can you come out for ice dams?
Same-day when a steam slot and safe travel allow — often within hours for active interior leaks. During metro-wide cold snaps we book the next daylight window and tell you which one before we leave the shop. Call (763) 313-8516 for triage.
Why will you not use a pick or rock salt?
Picks puncture shingles and flashings. Salt and calcium chloride corrode gutters and leave staining. Low-pressure steam removes the dam without creating the spring leak you will pay for twice.
Do you work in deep winter and on two-story homes?
Yes, when conditions are safe for the crew and equipment. Extreme wind, lightning or ice-glazed ladders pause work. Steep or tall roofs take longer and may need extra staging — priced before we start.
Do I need a permit for ice dam removal?
Emergency steam removal on an existing roof almost never needs a building permit in Twin Cities suburbs. Structural roof repairs or reroofs that follow are a different scope and may — we flag that if you hire us for the follow-up.
What if you find damaged shingles or fascia under the ice?
We document it while we are there and put options in writing. Emergency steaming stops the water; permanent repairs wait for safe weather unless the failure is actively open to the interior. Same crew can quote roofing, fascia & soffit, or seamless gutters for spring.
Will removing the ice dam stop it from coming back?
Steaming stops the current emergency. Recurrence depends on attic heat loss, ventilation, snow load and eave detailing. Roof raking, clear gutters, guards, and ice & water shield on the next roof are the lasting levers — see our ice dam prevention guide.
Do you also clear roof snow without an ice dam?
Yes. Roof-edge raking after heavy snow reduces the chance a dam forms on the next thaw. It is often faster and cheaper than waiting for ice to seal the eave.
Do you remove ice dams in Minneapolis, Maple Grove and Albertville?
Yes. We are based in Albertville and steam ice dams across the metro, including Minneapolis, Maple Grove, Albertville, St. Michael, Plymouth and Blaine. Same-day triage: (763) 313-8516.